Liste Kurzzeichen

A            
A/B/A Acrylnitril/Butadien/Acrylat
A/EPDM/S    Acrylnitril/Ethylen-Propylen-Styrol-Copolymeres
A/PE-C/S Acrylnitril/chloriertes Polyethylen/Styrol
AAS Methacrylatacrylstyrol
AB Kennbuchstaben für "mit Antiblockmittel"
ABR Acrylester-Butadien-Kautschuk
ABS Acrylnitril-Butadien-Styrol-Copolymere      
AC Kennbuchstabe für "Acetat"
ACM Copolymere aus Ethylacrylat
ACS Mischungen und Pfropf-Copolymere aus Acrylnitril-Styrol-Copolymeren mit
chloriertem Polyethylen
AECM Acrylat – Acrylester - Kautschuk
AES Acrylnitril-Ethylen-Propylen-Styrol-Copolymeres
AFMU Terpolymere aus Tetrafluorethylen, Trifluornitrosomethan und Nitroso-Perfluorbutter-
säure (Nitroso-Kautschuk)
AMBS Copolymere aus Acrylnitril-Methylmethacrylat-Butadien-Styrol
AMMA Acrylnitril-Methylmethacrylat-Copolymere (auch A/MMA)  
ANM Copolymere von Acrylnitril mit Ethylacrylat oder anderen Acrylaten (vgl. AR)
AP Ethen-Propen-Kautschuk (vgl. APK, EPM, EPR)    
APE Aromatische Polyester        
APK Ethylen-Propylen-Terpolymer-Kautschuk (vgl. AP, APT, EPM, EPTR)
AR Acrylester-Kautschuk (vgl. ABR, ACM, ANM)    
ART Ethylen-Propylen-Terpolymer-Kautschuk (vgl. EPDM, EPT, EPTR)  
AS Kennbuchstaben für "mit Antistatikum"      
ASA Acrylnitril-Styrol-Acrylester-Copolymere (auch A/S/A)    
ASE Alkylsulfonsäureester        
AU Polyester-Urethan-Kautschuk      
AXS Acrylnitril-Ethylen-Propylen-Styrol-Copolymere (vgl. AES)  
           
B            
BBP Benzylbutylphthalat        
BDMA Butandiol-1,4-di-methacrylat      
BDP Butyldecylphthalat        
BFE Bromtrifluorethen-Polymere      
BFK Borfaserverstärkte Kunststoffe      
BHT 2,6-di-tert.-butyl-p-Kresol        
BIIR Brom-Isobuten-Isopren-Kautschuk      
BMI Bismaleinimid        
BOA Benzyloktyladipat        
BOP Butyloctylphthalat        
BP Polybuten (vgl. PB, PBT)        
BR Butadienkautschuk        
BS Butadien-Styrol-Copolymerisat      
Butyl Butylkautschuk        
BVE Butylvinylether        
           
C            
CA Cellulose-Acetat        
CAB Cellulose-Acetobutyrat        
CAP Cellulose-Acetopropionat        
CB Kennbuchstaben für "mit Russ"      
CEM Polychlortrifluorethen        
CF Kresol-Formaldehyd-Harze      
CFK Kohlenstofffaser-verstärkter Kunststoff (vgl. KFK)    
CFM 1. Polychlortrifluorethylen        
CHC Epichlorhydrin-Ethylenoxid-Kautschuk      
CHDI Cyclohexan-1,4-Disocyanat      
CHR Epichlorhydrin-Kautschuk (vgl. CHC, CO, ECO)    
CIIR ChlorIsobuten-Isopren-Kautschuk      
CM chloriertes Polyethen (vgl. CPE, PEC)      
CMC Carboxymethyl-Cellulose        
CMHEC Carboxymethyl-hydroxyethyl-Cellulose      
CN Cellulose-Nitrat (vgl. NC)        
CNR Carboxy-nitroso-Kautschuk (vgl. AFMU)      
CO Epichlorhydrin-Kautschuk, Poly-2-Chlormethyl-Oxiran (vgl. CHC, CHR, ECO)
COC Cycloolefin-Copolymer        
Cop. Copolymere(s)        
CP Cellulose-Propionat (vgl. CAP)      
CPE Chloriertes Polyethylen (vgl. CM, PEC)      
CPT kristallisiertes (bzw. kristallisierbares) PET    
CPVC nachchloriertes PVC (vgl. PVCC)      
CR Poly-2-chlor-butadien-1,3, Chloropren-Kautschuk    
CS Casein-Kunststoff, Kunsthorn      
CSF Casein-Formaldehyd        
CSM chlorsulfoniertes Polyethylen (vgl. CSPR, CSR)    
CSR chlorsulfoniertes Polyethylen      
CTA Cellulose-triacetat        
CTFE Polychlortrifluorethylen (vgl. PCTFE)      
CU Kennbuchstaben für "mit Kupferstabilisierung"    
CuHp kupferkaschiertes Hartpapier      
           
D            
DABCO Triethylen-Diamin        
DAC Diallylchlorendat        
DADPM 4,4-Diamino-diphenylmethan      
DAF Diallyl-fumarat        
DAIP Diallyl-isophthalat        
DAM Diallyl-maleat        
DAN Diallyl-naphthalat        
DAP Diallyl-phthalat (vgl. FDAP, PDAP)      
DBEEA Dibutoxy-ethoxy-ethyl-adipat      
DBP Dibutylphthalat        
DBS Dibutyl-sebazat        
DCHP Dicyclohexylphthalat        
DCP Dicrapylphthalat        
DDP Didecylphthalat        
DEHP Diäthylhexylphthalat        
DEP Diethylphthalat        
DHP Diheptylphthalat oder Dihexylphthalat      
DHS Dihexylsebazat        
DHXP Dihexylphthalat        
DIBA Diisobutyladipat        
DIBP Diisobutylphthalat        
DIDA Diisodecyladipat        
DIDG Diisodecylglutarat        
DIDP Diisodecylphthalat        
DIHP Diisoheptylphthalat        
DIHXP Diisoleptalphthalat        
DINA Diisononyladipat        
DINP Diisononylphthalat        
DIOA Diisooctyladipat        
DIOM Diisooctylmaleat        
DIOP Diisooctylphthalat        
DIOS Diisooctylsebazat        
DIOZ Diisooctylazelat        
DIPP Diisopentylphthalat        
DITDP Diisotridecylphthalat        
DITP Diisotridecylphthalat        
DMA Dimethylacetamid        
DMC engl. dough molding compounds (vgl. BMC)    
DMF Dimethylformamid        
DMP Dimethylphthalat        
DMSO DimethylSulfoxid        
DMT DiemthylTerephthalat        
DNA Dinonyladipat        
DNODP Dinoctylndecylphthalat        
DNP Dinonylphthalat        
DNS Di-(3,5,5-trimethylhexyl)-sebacat      
DOA Dioctyl-adipat, Di-2-ethylexyl-adipat      
DODP Dioctyldecylphthalat        
DOF Di-2-ethyl-hexyl-fumarat        
DOIP Dioctyl-isophthalat, Di-2-ethylhexyl-isophthalat    
DOM Dieethylhexylmaleat        
DOP Dioctylphthalat, Dieethylhexalphthalat      
DOS DioctylSebazat, Di2ethylhexylsebazat      
DOTP Dioctylterephthalat, Di2ethylhexylterephthalat    
DOZ Dioctylazelat, Di2ethylhexylazelat      
DPCF Diphenylkresylphosphat        
DPOF Diphenyloctylphosphat        
DPP Dipropylpropionat        
DPTU Diphenylthioharnstoff        
DTDP Diisotridecylphthalat        
DUP Diundecylphthalat        
DVB Divinyl-benzol        
           
E            
E/P Ethylen/Propylen Copolymere      
EAA Ethylen – Acrylsäure - Copolymerisat      
EAM Ethylen-Vinylacetat-Copolymere (vgl. EVM)    
EBA Ethylen - Butylacrylat - Copolymerisat      
EC Ethyl-Cellulose        
ECB Mischungen von Ethylen-Copolymeren mit Bitumen    
ECO Epichlorhydrin-Kautschuk        
ECTFE Polyethylen-chlortrifluorethylen (auch E/CTFE)    
EDMA Ethylenglykol-dimethacrylat      
EEA Ethylen-Ethylacrylat-Copolymere (auch E/EA)    
EHEC Hydroxylethyl-Cellulose        
ELO Epoxidiertes Leinöl        
EMA Ethylen-Methylmethacrylat-Copolymere (auch E/MA)    
EP Epoxidharze        
EPDM Ethylen-Propylen-Dien-Kautschuk      
EPE Epoxidharz-Ester        
EPM Ethylen-Propylen-Kautschuk (vgl. AP, APK, EPR)    
EPR Ethylen-Propylen-Kautschuk      
EPS Schäumbares (expandierbares) Polystyrol    
EPT Ethylen-Propylen-Terpolymer-Kautschuk (vgl. APT, EPDM, EPTR)  
EPTR Ethylen-Propylen-Terpolymer-Kautschuk (vgl. APT, EPDM, EPT)  
E-PVC PVC-Emulsionspolymerisat      
E-SBR Styrol-Butadien-Kautschuk-Emulsionspolymerisat    
ESO Epoxidiertes Sojaöl        
ET Poly-ethylenoxid-tetrasulfid-Kautschuk      
ETER Epichlorhydrin-Terpol.-Kautschuk      
ETFE Ethylen-Tetrafluorethylen-Copolymere (auch E/TFE)    
EU Polyether-Urethankautschuk (vgl. UE)      
EVA Ethylen-Vinylacetat-Copolymere (auch E/VA)    
EVAC Ethylen-Vinylacetat-Copolymere (vgl. EAM, EVA, EVM)  
EVAL Verseiftes Ethylen-Vinylacetat-Copoymeres    
EVM Ethylen-Vinylacetat-Kautschuk (vgl. EAM, EVAC)    
EVOH Ethylen / Vinylalkohol - Copolymer      
           
F            
FDAP Diallylphthalat(-Harze) (vgl. DAP, PDAP)    
FEP Tetrafluorethylen-Hexafluorpropylen-Copolymere    
FF Furan-Formaldehyd-Harz        
FK Faserverstärkte Kunststoffe      
FKM Fluorkautschuk        
FMQ siehe MPF          
FO Siliconkautschuk mit fluorierten Substituenten    
FPM Kautschuk mit Fluor-, Fluoralkyl- oder Fluoralkoxy-Gruppen an der Hauptkette
FR Kennbuchstaben für "mit Flammschutzmittel"    
FSI Fluorhaltiger Methylsilikon-Kautschuk      
FVMQ Siliconkautschuk mit Fluor-, Vinyl- und Methylsubstituenten  
FW Kennbuchstaben für mit Reaktionsmassen imprägnierte Filamentgewebe-Prepregs
           
G            
G Kennbuchstabe für "Granulat"      
GF 1. Allgemeine Bezeichnung für "Granulat" 2. Kennbuchstaben für "glasfaser-
armierte Formmassen"
GFK Glasfaserverstärkte Kunststoffe      
GFW Kennbuchstaben für Filamentgewebe-Prepreg    
GLN Kennbuchstaben für Nähwerkstoff-Prepreg    
GLU Kennbuchstaben für Unidirektionalgelege-Prepreg    
GLX Kennbuchstaben für Kreuzgelege-Prepreg    
GMC Kennbuchstaben für Endlosmatten-Prepregs aus Endlosmatte ohne Binder
(Harzmatte)
GMCB Kennbuchstaben für Endlosmatten-Prepregs aus Endlosmatte mit Binder
(Harzmatte)
GMSB Kennbuchstaben für Matten-Prepreg (Harzmatte)    
GMSR Kennbuchstaben für Schnittroving-Prepreg (Harzmatte)  
GMT Glasmattenverstärkte Thermoplaste      
GOST USSR-Normen        
GP 1. Allzweck (engl. general purpose) 2. Guttapercha3. Kennbuchstaben für
"Papier-Prepreg"
GPO Copolymere aus Propylenoxid und Allylglycidylether    
GR 1. engl. government rubber 2. Kennbuchstaben für Strang-Prepreg (vorimprägniertes
Roving, Stratipreg)
GR-I Butylkautschuk (frühere USA-Bezeichnung)    
GR-N Nitrilkautschuk (frühere USA-Bezeichnung)    
GR-S Butadien-Styrol-Kautschuk (frühere USA-Bezeichnung)  
GRW Kennbuchstaben für vorimprägniertes Rovinggewebe    
GS 1. Kennbuchstaben für Stäbchen-Formmasse 2. Kennbuchstaben für glaskugel-
gefüllte Formmassen
GT Kennbuchstaben für Gewirk- oder Gestrick-Prepreg    
GUP Glasfaser-Polyester-Kunststoffe      
GV 1. Kennbuchstaben für "Vliesstoff-Prepreg" (Oberflächen-Harzmatte)
2. Allgemeine Bezeichnung für "glasfaserverstärkt"
           
H            
H6XDI  Hexahydro-xyclen-diisocyanat       
HDI Hexamethylen-Diisocyanat      
HD-PE ehemalige Bezeichnung für Polyethylen hoher Dichte (vgl. PE-HD)  
Hgw Hartgewebe          
HI hochschlagfest (engl. high impact)      
Hm Harzmatte          
HM Kennbuchstaben für "holzmehlgefüllt"      
HMTP Hexamethyl-Phosphorsäure-Triamid      
HMWPE  Polyethylen mit hoher molarer Masse       
HNOPP  Hexyl-nonyl-undecyl-phthalat       
HNUDA  Hexyl-nonyl-undecyl-adipat       
HPC  Hydroxypropyl-Cellulose         
HPL  Schichtpressstoffe (engl. high pressure laminates)     
HPp  Hartpapier           
HS Kennbuchstaben für "mit besonderer Wärmestabilisierung"   
HXDDA  Hexyloctyldecyladipat         
HXODA Hexyloctyldecyladipat         
HXODP  Hexyloctyldecylphthalat         
HXOPP Hexyloctyldecylphtalat         
           
I            
IIR Isopren-isobuten-Kautschuk = Butylkautschuk (vgl. vgl. Butyl, GR-I, PIPI)
IM Poly-Isobuten (vgl. PIB)        
IPDI siehe Isophoron-Diisocyanat      
IPO Isopropyl-Oleat        
IR Isopren-Kautschuk, "synthetischer Naturkautschuk"    
           
J            
           
K            
KFK Kohlenstoff-faserverstärkte Kunststoffe (vgl. CFK)    
           
L            
L Kennbuchstabe für "linear" bzw. "niedrig"    
LC flüssig kristallin (engl. liquid crystal)      
LCP flüssig-kristalline Polymere (engl. liquid crystalline polymers)  
LD-PE ehemalige Bezeichnung für Polyethylen niedriger Dichte (vgl. PE-LD)
LLDPE ehemalige Bezeichnung für "linear low density polyethylene" (vgl. PE-LLD)
LN Kennbuchstaben für flächenförmige Reaktionsharz-Formmassen mit Nähwerk-
stoffen (Nähwerkstoff-Prepreg)
LP ungsättigte Polyesterharze mit verringerter Härtungsschrumpfung (engl. low-profile)
L-SBR Butadien-Styrol-Kautschuk, Lösungspolymerisat    
LU Kennbuchstaben für flächenförmige Reaktionsharz-Formmassen mit
Unidirektionalgelege (Unidirektionalgelege-Prepreg)
LX Kennbuchstaben für flächenförmige Reaktionsharz-Formmassen mit Kreuzgelege
(Kreuzgelege-Prepreg)
           
M            
MABS Methylmethacrylat / Acrylnitril / Butadien / Styrol    
MBS Methylmethacrylat-Butadien-Styrol-Copolymere (auch M/B/S)  
MC 1. Methyl-Cellulose2. Kennbuchstaben für "Endlosmatten-Prepreg ohne Binder"
MCB Kennbuchstaben für "Endlosmatten-Prepreg mit Binder"  
MDI Diphenylmethan-4,4-diisocyanat      
MD-PE ehemalige Bezeichnung für Polyethylen mittlerer Dichte (vgl. PE-MD)
MEK Methyl-ethyl-keton        
MF Melamin-Formaldehyd-Harze      
MFK Metallfaserverstärkte Kunststoffe      
MFQ Siliconkautschuk mit Methyl- und Fluor-Substituenten    
MMA Methylmethacrylat        
MPF Melamin-Phenol-Formaldehyd-Harz      
MPF Melamin-Phenol-Formaldehyd-Harze      
MPQ Siliconkautschuk mit Methyl- und Phenyl-Substituenten  
M-PVC PVC-Massepolymerisat        
MPVQ Siliconkautschuk mit Methyl-, Phenyl- und Vinylsubstituenten  
MQ Siliconkautschuk mit ausschliesslich Methylgruppen an der Polymerkette
= Polydimethylsiloxan
MSB Kennbuchstaben für Mattenprepreg mit Binder    
MSR Kennbuchstaben für Schnittroving-Prepreg ohne Binder  
MUF Melamin - Harnstoff - Formaldehyd - Harz    
MVFQ Fluor-Silikon-Kautschuk        
MVQ Methyl-Vinyl-Silikon-Kautschuk      
MWK Metallwhiskerverstärkte Kunststoffe      
           
N            
NAR Acrylnitril - Acrylat - Kautschuk      
NBR Acrylnitril-Butadien-Kautschuk, Nitrilkautschuk (vgl. PBAN)  
NC Nitrocellulose = Cellulosenitrat      
NCNS N-Cyanosulfonamid-Harze        
NCR Acrylnitril-Chloropren-Kautschuk      
NDI Naphthylen-diisocyanat        
NIR Acrylnitril-Isopren-Kautschuk      
NK Naturkautschuk (vgl. NR)        
NR Naturkautschuk (engl. natural rubber) (vgl. NK)    
NUDA Nonyl-undecyl-adipat        
NUDP Nonyl-undecyl-phthalat        
           
O            
ODA Octyldecyladipat        
ODP Octyldecylphthalat (vgl. DODP)      
ODTM n-Octyldecyltrimelliat        
OER ölgestreckter Kautschuk (engl. oil-extended rubber)    
OPP orientierte (d.h. verstreckte) Polypropylen-Folie    
OPR Oxypropylen-Kautschuk        
OPS orientierte (d.h. verstreckte) Polystyrol-Folie    
           
P            
PA Polyamid          
PA11 Polyamid aus 11-Amino-Undecansäure      
PA12 Polyamid aus Laurinlactam (1,12-Dodecanlactam)    
PA46 Polyamid 46, 1,4-Diaminobutan-Adipinsäure-Copolymerisat  
PA6 Polyamid aus Caprolactam      
PA6/12 Mischpolyamid aus Caprolactam und Laurinlactam    
PA610 Polyamid aus Hexamethylendiamin und Sebazinsäure  
PA612 Polyamid aus Hexamethylendiamin und Undecansäure  
PA6-3-T Polyamid aus Trimethyl-hexamethylendiamin und Terephthalsäure  
PA66 Polyamid aus Hexamethylendiamin und Adipinsäure    
PA66/610 Misch-Polyamid aus Hexamethylendiamin, Adipinsäure und Sebazinsäure
PA6I Polyamid aus Hexamethylendiamin und Isophthalsäure  
PA6T Polyamid aus Hexamethylendiamin und Terephthalsäure  
PAA Polyacrylsäure        
PAC Polyacrylnitril        
PAE Acrylkautschuk        
PAEK Polyaryletherketon, Gruppenbezeichnung    
PAI Polyamidimid        
PAN Polyacrylnitril        
PAPI Polymethylen-polyphenyl-isocyanat      
PAR Polyarylate          
PB Polybuten-1          
PBA Polybutylacrylat        
PBAN Butadien-Acrylnitril-Kautschuk      
PBI Polybenzimidazol        
PBMI Polybismaleinimid        
PBO Polybenzoxazol        
PBR Vinylpyridin-Butadien-Kautschuk      
PBS Butadien-Styrol-Kautschuk      
PBT 1. gelegentlich: Polybuten 2. Polybutylenglykolterephthalat 3. Polybenzthiazol
PC Polycarbonat        
PCB Polychlorbiphenyl        
PCD Poly-Carbodiimid        
PCE Polycarbonatester        
PCT Polycyclohexandimethylenterephthalat      
PCTFE Polychlortrifluorethylen        
PCTG 1,4Cyclohexandimethylenterephthalat      
PDAP Polydiallylphthalat        
PDMS Polydimethylsiloxan        
PE Polythylen          
PE – C Chloriertes Polyethylen        
PE - E P olyethylen, expandiert        
PE - HD Polyethylen hohe Dichte        
PE - LD Polyethylen niedrige Dichte      
PE - M Polyethylen mittlere Dichte      
PE - X Polyethylen vernetzt        
PEBA Polyether-Block-Amide        
PEC Chloriertes Polythylen, Polyestercarbonat    
PeCe Nachchloriertes PVC        
PEEK Polyetheretherketon        
PEG Polyethylenglykol        
PE-HD Polythylen hoher Dichte (oberhalb 0,940 g/cm ). Identisch mit Niederdruck-PE,
Linear-PE
PEI Polyetherimid        
PEI Polyetherimid        
PEK Polyetherketon        
PEKK Polyetherketonketon        
PE-LD Polythylen niedriger Dichte (bis zu 0,930 g/cm )    
PE-LLD Polyethylen niedriger Dichte mit linearer Struktur    
PE-MD Polyethylen mittlerer Dichte (zwischen 0,93 und 0,94 g/cm )  
PEN Poly-Ethylen-Naphthalat        
PEO Polyethylenoxid        
PEOX Polyethylenoxid        
PEP Ethylen-Propylen-Copolymere      
PES Polyethersulfon        
PET Polyethylenglykolterephthalat      
PET - A Polyethylenterephthalat, amorph      
PET – C Polyethylenterephthalat, kristallin      
PET - G Polyethylenterephthalat, glykolmodifiziert    
PETS Pentaerythrit-Tetrastearat        
PE-VLD very low density polyethylene (Dichte etwa unter 0,905 g/cm )  
PF Phenol-Formaldehyd-Harze      
PFA Perfluoro-Alkoxyalkan        
PFEB Tetrafluorethylen-Hexafluorpropylen-Copolymere    
PFN Fluor-Phosphazen-Kautschuk      
PHA Phenacrylat- oder Vinylesterharze      
PHB Polyhydroxybutyrat        
PHD PHD-Polyole        
PhI Phenyl-isocyanat        
PI 1. Poly-trans-Isopren, Guttapercha 2. Polyimid    
PIB Polyisobuten        
PIBI Isopren-Isobuten-Kautschuk = Butylkautschuk    
PIBO Poly-Isobutenoxid        
PIC Polyisocyanat        
PIP Cis-1,4-Poly-Isopren        
PIR Poly-Isocyanurat        
PISO  Polyimidsulfon        
PK Polyketon          
PLA P olylactid / Polymilchsäure        
PMCA Polymethylchlor-Methacrylat      
PMDI Polymeres Diphenylmethan-Diisocyanat      
PMI Polymethacrylimid        
PMMA Polymethylmethacrylat        
PMMI Polymethacrylimidhaltige PMMI-Formmasse    
PMP Poly-4-methylpenten        
PMQ Phenylmethylpolysiloxan-Kautschuk      
PMS Polymethylstyrol        
PNF Phosphornitril-Fluor-Polymer      
PNR Poly-Norbornen-Kautschuk      
PO 1. Propenoxid-Kautschuk 2. Polyolefin(e)    
POB Polyphydroxybenzoat        
POM Polyoxymethylen, Polyacetal, Acetalharz    
POP Polyphosphonat        
PP Polypropylen        
PP - B Polypropylen - Blockpolymerisat      
PP - C Chloriertes Polypropylen        
PP – E Expandiertes Polypropylen        
PP - H Polypropylen, Homopolymerisat      
PP - HC Polypropylen, hochkristallin      
PP - Q Polypropylen, hohe Schmelzefestigkeit      
PP - R Polypropylen - Randompolymerisat      
PPA Polypropylen-adipat        
PPC Chloriertes Polypropylen, Poly,Phthalat-Carbonat    
PP-C Polypropylen-Copolymere        
PPDI p-Phenylen-diisocyanat        
PPE Polyphenylenether        
PP-H Polypropylen-Homopolymere      
PP-M Mischungen von Polypropylen mit anderen Polymeren (PP-Anteil mindestens 50%)
PPMS Polypmethylstyrol        
PPO Polyphenylenoxid, (Oberbegriff ist PPE)      
PPOX Polypropylenoxid        
PP-R Statistische (Random-)Propylen-Copolymere    
PPS Polyphenylensulfid        
PPSU Polyphenylensulfon (vgl. PSU)      
PPT Poly-Propylen-Terephthalat      
PQ Siliconkautschuk mit Phenylsubstituenten    
PS Polystyrol          
PS - E Polystyrol, expandiert        
PS - HI Polystyrol, hoch schlagfest      
PS – MI Polystyrol, mittel schlagfest      
PSAN Styrol-Acrylnitril-Copolymere (vgl. SAN)      
PSB Styrol-Butadien-Copolymere (vgl. SB)      
PSBR Vinylpyridin-Styrol-Butadien-Kautschuk      
PSI Methylsilicon-Kautschuk mit Phenylgruppen    
PSU Polysulfon          
PTFE Polytetrafluorethylen (vgl. TFE)      
PTMT Polytetramethylenterephthalat = Polybutylenglykolterephthalat  
PTN Polytrimethylen-Napthalat        
PTT Poly-Trimethylen-Terephthalat      
PU häufig gebrauchte, jedoch nicht genormte Abkürzung für Polyurethan (vgl. PUR)
PUR Polyurethan          
PVA Polyvinylacetat        
PVAC Polyvinylacetat        
PVAL Polyvinylalkohol        
PVB Polyvinylbutyral        
PVC Polyvinylchlorid        
PVC - C Chloriertes Polyvinylchlorid        
PVC - P Polyvinylchlorid mit Weichmacher      
PVC - U Polyvinylchlorid hart, ohne Weichmacher      
PVCA Vinalchlorid-Vinylacetat-Copolymere      
PVC-C nachchloriertes PVC        
PVC-P PVC-weich          
PVC-U PVC-hart          
PVDC Polyvinylidenchlorid        
PVDF Polyvinylidenfluorid        
PVF Polyvinylfluorid        
PVF2 Polyvinylidenfluorid        
PVFM Polyvinylformal (vgl. PVFO)      
PVFO Polyvinylformal (vgl. PVFM)      
PVID Polyvinylcyanid        
PVK Polyvinylcyanid        
PVM Vinylchlorid-Vinylmethylether-Copolymere    
PVME Poly-vinylmethylether        
PVP Polyvinylpyrrolidon        
PVSI Methylsilicon-Kautschuk mit Phenyl- und Methylgruppen  
PY Ungesättigte Polyesterharze (vgl. UP)      
           
Q            
           
R            
RC Hartschaumstoff (engl. rigid cellular)      
RF Resorcin-Formaldehyd-Harze      
RP verstärkte Kunststoffe (engl. reinforced plastics)    
RW Kennbuchstaben für "Povinggewebe-Ürepreg"    
           
S            
S – PVC Suspensions-Polyvinylchlorid      
SA Kennbuchstaben für "mit speziellem Additiv"    
SAN Styrol-Acrylnitril-Copolymere      
SB Styrol-Butadien-Copolymere      
SBP Styrol-Butadien-Harz        
SBR Styrol-Butadien-Kautschuk      
SBR Styrol / Butadien - Kautschuk      
SBS Styrol / Butadien / Styrol        
SCR Styrol-Chloropren-Kautschuk      
SEBS Styrol / Ethylen - Butylen / Styrol      
SFK Synthesefaserverstärkte Kunststoffe      
SI Silikon          
SIR 1. Silicon-Kautschuk 2. Styrol-Isopren-Kautschuk    
SIS Styrol - Isopren - Styrol Block-Copolymerisat      
SL Kennbuchstaben für "mit Gleitmittel"      
SMA Styrol/Maleinsäureanhydrid      
SMC Harzmatte (engl. sheet molding compound)    
SMMA Styrol - Methylmethacrylat - Copolymerisat    
SMR nach Reinheitsgrad genormter malayischer Naturkautschuk  
SMS Styrol-Methylstyrol-Copolymere      
SP Gesättigte Polyester        
SPH Styrolisiertes Phenol        
S-PVC PVC-Suspensionspolymerisat      
SRP mit Butadien-Styrol-Kautschuk schlagzäh gemachte Kunststoffe  
SS einstufig          
           
T            
TAC Triallyl-cyanurat        
TATM Triallyl-trimellitat        
TC technisch klassifizierter Naturkautschuk      
TCEF Trichlor-ethylphosphat        
TCM Trichlor-melamin        
TDI Toluylen-diisocyanat        
TDID Dimerisiertes toluylen-diisocyanat      
TEDMA Triethylenglykoldimethacrylat      
TEGDA Triethylenglykoldiacetat        
TFE Polytetrafluorethylen        
THF Tetrahydrofuran        
TIOTM Triisooctyltrimellitat        
TKP Trikresylphosphat        
TM Polysulfid - Kautschuk        
TMP Trimethylolpropan        
TMPT Trimethylolpropan-Trimethacrylat      
TNPP Trinonylphenyl-Phosphit        
TOF Trioctylphosphat, Tri-2-ethylexylphosphat    
TOP Trioctylphosphat, Tri-2-ethylexylphosphat    
TOPM Tetraoctyl-pyromellitat        
TOR PolytransoctenamerKautschuk      
TOTM Trioctylmellitat        
TPA Thermoplastische Polyamid-Elastomere      
TPC Thermoplastische Copolyester-Elastomere    
TPE Thermoplastische Elastomere      
TPE-A Thermoplastische Polyamid-Elastomere      
TPE-E Thermoplastische Polyester-Elastomere      
TPE-O Thermoplastische Polyolefin-Elastomere      
TPE-S Thermoplastische Styrol-Elastomere      
TPF Triphenylphosphat        
TPI Thermoplastoid        
TPO Thermoplastische Olefine-Elastomere      
TPP Triphenyl-phosphat        
TPR 1,5-Trans-polypentenamer-Kautschuk      
TPS Thermoplastische Styrol-Elastomere      
TPU Thermoplastische Polyurethan-Elastomere    
TPV Thermoplastische Kautschuk-Vulcanisate    
TPZ Unklassifizierte thermoplastische Elastomere    
TRIM Trimethylolpropan-trimethacrylat      
TTP Tritolyl-phosphat = Trikresylphosphat      
TU Thioharnstoff        
           
U            
UDP Undecyldodecylphthalat        
UF Harnstoff-Formaldehyd-Harze      
UFS Harnstoff-Formaldehyd-Schaumstoff      
UHMWPE Polyethylen mit ultrahohem Molgewicht (etwa über 1,5 Mio.)  
UP Ungesättigte Polyesterharze      
UP - E Ungesättigtes Polyesterharz, expandiert    
           
V            
VA Vinylacetat (vgl. VAC)        
VAC Vinylacetat (vgl. VA)        
VC Vinylchlorid (vgl. VCM)        
VC/E Vinylchlorid/Ethylen-Copolymere      
VC/E/MA Vinylchlorid/Ethylen/Methylmethacrylat-Copolymere-Copolymere  
VC/E/VAC Vinylchlorid/Ethylen/Vinylacetat-Copolymere    
VC/MA Vinylchlorid/Maleinsäure-Copolymere      
VC/MMA Vinylchlorid/Methylmethacrylat-Polymere    
VC/OA Vinylchlorid/Octylacrylat-Copolymere      
VC/VAC Vinylchlorid/Vinylacetat-Copolymere      
VC/VDC Vinylchlorid/Vinylidenchlorid-Copolymere    
VCM monomeres Vinylchlorid (engl. Vinyl chloride monomer)  
VE Vinylesterharze / Phenacrylatharze      
VF Vulkanfieber          
VF2 Vinylidenfluorid        
VMQ Siliconkautschuk mit Methyl- und Vinyl-Substituenten    
VPE Vernetztes Polyethylen        
VQ Siliconkautschuk mit Vinylsubstituenten    
VSI Methylsiliconkautschuk mit Vinylgruppen    
VVO Faktis (engl. Vulcanized vegetable Oil)      
           
W            
WFK Whiskerverstärkte Kunststoffe      
WM Weichmacher        
           
X            
XABS Copolymere aus Acrylnitril, Butadien, Styrol und einem 4. Monomer  
XDI Xylylendiisocyanat        
XNBR Carboxylgruppenhaltiger Acrylnitril-Butadien-Kautschuk  
XSBR Carboxylgruppenhaltiger Styrol-Butadien-Kautschuk    
           
Y            
YSBR Thermoplastisches Elastomer aus Styrol und Butadien  

Quelle:
Johann Renfer GmbH, www.renfer.ch

Kunststoff-Deutschland - das Internetportal
für die deutsche Kunststoff-Industrie

Kunststoff-Deutschland Logo

Startseite
Suchen 

Twitter
Folgen Sie dem News-Kanal von Kunststoff-Deutschland auf XING
Facebook
Linkedin Logo

         

×

☰Menü  

Partnerwebsites:      Kunststoff-Schweiz        Kunststoff-Guide 

Grafe Banner turn on

 

 

Der Titel der Seite wird von NetObjects Fusion generiert